Mini RAID 0 or 1 Aluminum Enclosure Supports 2 Drives
This is one tiny little enclosure that is incredibly sleek with some powerful features. The casing is made of high quality aluminum.
Product Highlights
- Detects Hard Disks
- Overheat Detector
- Fan Detector
- LCD Display for easy configuration
- Hotswap design enables to swap the drives without system shutdown
- Combination interface USB 2.0 and eSATA for compatability.
- Built-in Power supply (no bulky power brick)
Easy Installation, Heat Dissipation, Impact Resistance
Install the drives to the included trays, slide them in and lock in place. That's it. A few minutes and you're up and running.
Incredible Speed Boost Over Existing External Technologies
The single most anticipated feature of the SATA external solution is the sheer speed enhancement you get over FireWire and USB 2.0. Take a look at the list below:
- USB 1.1 = 12Mbps
- USB 2.0 = 480 Mbps
- FireWire IEEE1394a = 400Mbps
- FireWire IEEE1394b = 800Mbps
- eSATA = 1.5Gbps
As you can see from the list above eSATA offers you a tremendous speed boost with room to spare. 
Faster Detection Times
From our own internal testing we have come to the conclusion that most systems with SATA detect and unload the external hard drive enclosures in a fraction of the time over USB and FireWire.
Shielded External Cable
Because the eSATA connection offers such a high bandwidth you need a cable that will not suffer from electronic interference. The shielded cable provided ensures that you get the most out of your enclosure.
Hot Swap
There is nothing more annoying then having to turn off your computer just to plug in a device. Well with this kit you don't have to, plug and unplug the SATA cable while the computer is on.
Package Contents:
(1) Mini Aluminum 2 Bay HDD case with USB and eSATA ports
(2) HDD Trays
(1) Power cable
(1) RS232 Cable
(2) SATA cables
(1) USB cable
(1) User's Guide
| Technical Specifications: |
| Host Interface |
SATA 150MB
USB 2.0 56MB |
| Drive Interface |
3.5" SATA / SATA II HDD |
| RAID Level |
0,1 |
| Support Hot-Swap |
Hot-swap drive trays with lock mechanism |
| Auto Rebuilding |
Yes |
| Cooling |
3cm Ball Bearing Fan
4cm Ball Bearing Fan |
| Power Supply |
90-240V, 70 Watts Auto Switch |
| LCD Display |
LCD Control Display Panel for setup and configuration |
| Dimensions |
122 x 203 x 102 mm |
|